Interpreting Serial Output
When serial output is set to On, for every measurement the Analyzer outputs the data show in
Table 8.
Table 8: Data Fields Output to the Serial (RS-232) Port
Field Number
To view the data, you will need to use a communications program on your PC. For additional
information, see the Appendix section called "Using HyperTerminal" on page 228.
For example, a successful measurement would output as follows:
Note that when the Analyzer takes a successful measurement, the Warning/Error value (Field 9) is
null. If a Warning or Error is generated, the output would be as follows:
GE Analytical Instruments ©2009
1
Mode
2
Date
3
Time
4
TOC (ppb)
5
IC (ppb)
6
TC (ppb)
7
Acid (µL/min)
8
Oxidizer (µL/min)
9
Warning/Error message, if generated
Value
108 of 236
DLM 90488-01 Rev. A