GE Sievers 900 Series Operation And Maintenance Manual page 229

Appendix
• The location of HyperTerminal varies from computer to computer. Often it can be
launched by exploring the Start menu path as follows:
Start Programs
• Select Start
3. When HyperTerminal launches, the Connection Description window displays. Enter a
name in the Name field, such as Sievers 900 TOC Analyzer, and click OK.
4. When the Connect To window displays, select Communications Port from the Connect
Using drop-down menu. Click OK. If more than one communications port is in the list and
you're not sure which one to select, see "Determining Your Communications Port Number"
on page 230.
5. In the Com Settings window, specify the following settings:
Bits Per Second:9600
Data Bits:8
ParityNone
Stop Bits:1
Flow Control:Hardware
After selecting these values, click OK.
6. The main HyperTerminal window displays. Select Transfer
location and name for the file and click OK. Include a file extension of either .txt or
.csv. For example, JulyData.csv.
7. On the Analyzer, export the data you want to capture. Be sure to select Serial as your
export destination.
8. When the export begins, you will see the data streaming in the HyperTerminal window.
When the export is complete (activity stops in the HyperTerminal window), select
Transfer Capture Text
9. The data is now saved in the file location you specified in Step 6. When you open the file in
a spreadsheet or database program, you will need to browse to this folder in the program's
Open dialog box.
10. Exit out of HyperTerminal. You will be prompted to save the connection information. Saving
the information makes it easier to connect to the Analyzer the next time you want to
capture data.
GE Analytical Instruments ©2009
Accessories
Run, type Hypertrm in the Open field, and click OK.
Stop.
Communications HyperTerminal.
Capture Text. Specify a
229 of 236 DLM 90488-01 Rev. A