Archiving Data History; Viewing Data History - GE Sievers 900 Series Operation And Maintenance Manual

time for the download. When activated, every day at the specified time, the Analyzer will
automatically download the previous 24 hours of data to the flash memory drive, if it is
connected to the Analyzer's USB port.

Archiving Data History

When Archive Data is set to On, you will be prompted to archive your data when the data history is
close to full. If DataGuard is enabled, when the data history is completely full, an error message is
issued and the Analyzer stops taking TOC measurement until you archive the data.
To archive your data, follow these steps:
1. Select the Data tab.
• Press the Print Archive button if you wish to print the data history archive.
• Press the Export Archive button if you wish to export the data history archive to a file.
You will be prompted to connect a storage device to the USB port.
2. After printing or exporting the archive, the data history will be overwritten with new
measurements as additional data are collected.

Viewing Data History

You can view the data history stored in your Analyzer's whether or not analysis is in progress. To
display the Data History screen, follow these steps:
1. Select the Data tab.
2. Press the View button to display the data history.
3. Press the Setup button to change the type of data displayed in the data history list.
4. Press the Values button and select one of these options:
• TOC/IC/Mode — Displays TOC and IC data and the mode in which the data was
measured.
• TOC/IC/TC — Displays TOC, IC, and TC data.
• TOC/Reagents — Displays TOC data and reagent flow rates.
• TOC — Displays TOC data only.
GE Analytical Instruments ©2009 101 of 236 DLM 90488-01 Rev. A