Qos-Policy-Input - Dell C9000 Series Reference Manual

qos-policy-input

Create a QoS input policy on the router.
C9000 Series
Syntax
qos-policy-input qos-policy-name [layer2] [cpu-qos]
To remove an existing input QoS policy from the router, use the no qos-policy-
input qos-policy-name [layer2] [cpu-qos] command.
Parameters
qos-policy-name
layer2
cpu-qos
Defaults Layer 3
Command Modes
CONFIGURATION
CONFIGURATION TERMINAL BATCH
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.10(0.0)
9.9(0.0)
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.2.1.0
7.6.1.0
7.5.1.0
6.1.1.1
Enter the name for the policy map in character format (32
characters maximum).
(OPTIONAL) Enter the keyword layer2 to specify a Layer 2
Class Map. The default is Layer 3.
Enter the keyword cpu-qos to create a QoS input policy to be
used to rate-limit control-plane traffic (CoPP).
Description
Introduced the Configuration Terminal Batch mode on C9010.
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Policy name character limit increased from 16 to 32.
Introduced on the C-Series and S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Quality of Service (QoS) 1816