Show Config - Dell C9000 Series Reference Manual

Version
8.3.7.0
Usage Information The monitor command is saved in the running configuration at Monitor Session mode
level and can be restored after a chassis reload.
Use this command in Configuration Terminal Batch mode to monitor the traffic in a
dual-homing setup.
Example
Dell(conf)# monitor session 60
Dell(conf-mon-sess-60)
Related Command
show monitor session
show running-config monitor session
monitor session.

show config

Display the current monitor session configuration.
C9000 Series
Syntax
show config
Defaults none
Command Modes MONITOR SESSION (conf-mon-sess-session-ID)
Command History
This guide is platform-specific. For command information about other platforms, refer
to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.5(0.1)
9.0.2.0
8.3.19.0
8.3.7.0
8.3.11.1
Description
Introduced on the S4810.
— displays the monitor session.
— displays the running configuration of a
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Port Monitoring 1766