User Manual - Philips LPC2101 User Manual

Philips Semiconductors
Volume 1
RM_OPT_READHALFWORDS=TRUE
RM_OPT_WRITEHALFWORDS=TRUE
RM_OPT_READWORDS=TRUE
RM_OPT_WRITEWORDS=TRUE
RM_OPT_EXECUTECODE=FALSE
RM_OPT_GETPC=TRUE
RM_EXECUTECODE_SIZE=NA
RM_OPT_GATHER_STATISTICS=FALSE
RM_DEBUG=FALSE
RM_OPT_BUILDIDENTIFIER=FALSE
RM_OPT_SDM_INFO=FALSE
RM_OPT_MEMORYMAP=FALSE
RM_OPT_USE_INTERRUPTS=TRUE
RM_FIFOSIZE=NA
CHAIN_VECTORS=FALSE

User manual

Enables/Disables support for 8/16/32 bit read/write.
Enables/Disables support for executing code from "execute code" buffer. The code must
be downloaded first.
This option enables or disables support for the RealMonitor GetPC packet. Useful in
code profiling when real monitor is used in interrupt mode.
"execute code" buffer size. Also refer to RM_OPT_EXECUTECODE option.
This option enables or disables the code for gathering statistics about the internal
operation of RealMonitor.
This option enables or disables additional debugging and error-checking code in
RealMonitor.
This option determines whether a build identifier is built into the capabilities table of
RMTarget. Capabilities table is stored in ROM.
SDM gives additional information about application board and processor to debug tools.
This option determines whether a memory map of the board is built into the target and
made available through the capabilities table
This option specifies whether RMTarget is built for interrupt-driven mode or polled mode.
This option specifies the size, in words, of the data logging FIFO buffer.
Rev. 01 — 12 January 2006
UM10161
Chapter 21: RealMonitor
© Koninklijke Philips Electronics N.V. 2006. All rights reserved.
263