Jog Operation On The Operation Panel - Mitsubishi Electric FR-A820-00046 Instruction Manual

Basic operation
4.7.2

JOG operation on the operation panel

NOTE Operate only while FWD or REV key is pressed.
Example Operation example: Operate at 5 Hz.
Turning ON the power of the inverter
The monitor display turns ON.
Changing the operation mode
Press
ON.
Start ➔ acceleration ➔ constant speed
Keep pressing
acceleration/deceleration time", andis fixed at "
Deceleration ➔ stop
Release
acceleration/deceleration time", and the motor stops rotating at "
Tab. 4-22:
NOTES To change the running frequency, change Pr. 15 "Jog frequency" (initial value "5 Hz").
To change the acceleration/deceleration time, change Pr. 16 "Jog acceleration/deceleration time"
(initial value "0.5 s").
Parameters referred to
Pr. 15
Pr. 16
FR-A800
Operation panel
(FR-DU08)
twice to choose the PUJOG operation mode. The monitor displays"
or . The frequency value indicated on the display increases for the time set in Pr. 16 "Jog
or . The frequency value indicated on the display decreases for the time set in Pr. 16 "Jog
JOG operation performed on the operation panel
Jog frequency
Jog acceleration/deceleration time
Basic operation procedure (JOG operation)
Fig. 4-13:
Jog operation performed on the operation panel
Operation
" (5.00 Hz).
" (0.00 Hz).
I002433E
", and [PU] indicator turns
=> page 5-296
=> page 5-296
4 - 31