Component Names Of The Cc-Link Ie Field Network Communication; Wiring Method; Circuit Board - Mitsubishi Electric FR-A820-00046 Instruction Manual

Wiring for use of the CC-Link IE Field Network (FR-A800-GF)
2.11.4 Component names of the CC-Link IE Field Network communication circuit
board
Fig. 2-75:
NOTE Do not remove the CC-Link IE Field Network communication circuit board or the earth plate.
2.11.5

Wiring method

● Ethernet cable connection
Connect or remove an Ethernet cable after switching the power of the inverter OFF.
When wiring the Ethernet cable to the communication connector, check the connecting direction
of the Ethernet cable connector. Insert the connector to the communication connector until it
clicks.
When removing the Ethernet cable from the communication connector, hold down the latch on
the Ethernet cable connector, and pull out the cable while holding the latch.
2 - 106
Component names of the CC-Link IE Field Network communication circuit board
CC-Link IE Field Network
communication circuit board
Operation status indication LED
RUN D.LINK
SD ERR
RD L.ERR
Connector for communication (PORT2)
Connector for communication (PORT1)
Earth plate
Fig. 2-76:
Ethernet cable connection with PORT1 and PORT2
Installation and wiring
I003073E
I003074E