Ambient Conditions; Materials - ABB ACS150 series User Manual

Ambient conditions

Installation site altitude
Air temperature
Relative humidity
Contamination levels
(IEC 60721-3-3,
IEC 60721-3-2,
IEC 60721-3-1)
Sinusoidal vibration
(IEC 60721-3-3)
Shock
(IEC 60068-2-27, ISTA 1A)
Free fall

Materials

Drive enclosure
Package
Environmental limits for the drive are given below. The drive is to be used in a heated
indoor controlled environment.
Operation
installed for stationary use
0 to 2000 m (6600 ft) above
sea level
(above 1000 m [3300 ft], see
section Derating on page
138)
-10 to +50 °C (14 to 122 °F).
No frost allowed. See section
Derating on page 138.
0 to 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the presence of
corrosive gases.
No conductive dust allowed.
According to IEC 60721-3-3,
chemical gases: Class 3C2
solid particles: Class 3S2.
Note: The drive must be
installed in clean air
according to enclosure
classification.
Note: Cooling air must be
clean, free from corrosive
materials and electrically
conductive dust.
Tested according to
IEC 60721-3-3, mechanical
conditions: Class 3M4
2...9 Hz, 3.0 mm (0.12 in)
2
9...200 Hz, 10 m/s
(33 ft/s
Not allowed during operation According to ISTA 1A.
Not allowed
• PC/ABS 2 mm, PC+10%GF 2.5...3 mm and PA66+25%GF 1.5 mm, all in color
NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 mm, thickness of coating 20 micrometers
• extruded aluminium AlSi.
Corrugated cardboard.
Storage
in the protective package
-
-40 to +70 °C ±2%
(-40 to +158 °F) ±2%
Max. 95%
According to IEC 60721-3-1,
chemical gases: Class 1C2
solid particles: Class 1S2
-
2
)
2
Max. 100 m/s (330 ft/s
11 ms.
76 cm (30 in)
Transportation
in the protective package
-
-40 to +70 °C
(-40 to +158 °F)
Max. 95%
According to IEC 60721-3-2,
chemical gases: Class 2C2
solid particles: Class 2S2
-
According to ISTA 1A.
2 2
), Max. 100 m/s (330 ft/s
11 ms.
76 cm (30 in)
Technical data
147
2
),