ABB ACS150 series User Manual page 114
0.37...4kw;
0.5...5 hp
Hide thumbs
Also See for ACS150 series:
- User manual (156 pages) ,
- Installation instructions (4 pages) ,
- Quick installation and start-up manual (2 pages)
Table of Contents
Advertisement
Parameters in the Long parameter mode
Index Name/Selection
3107
AR AI<MIN
0 = DISABLE
1 = ENABLE
3108
AR EXTERNAL FLT
0 = DISABLE
1 = ENABLE
Description
Activates/deactivates the automatic reset for AI<MIN (analog input signal
under the allowed minimum level) fault
Automatically resets the fault after the delay set by parameter
TIME.
Inactive
Active
WARNING! The drive may restart even after a long stop if the
analog input signal is restored. Ensure that the use of this feature
will not cause danger.
Activates/deactivates the automatic reset for faults
2
(code: F0014/F0015). Automatically resets the fault after the delay set by
parameter
3103
DELAY TIME.
Inactive
Active
AI1 LOSS
(code: F0007).
3103
EXT FAULT 1/EXT FAULT
Actual signals and parameters
113
Def
0 = DISABLE
DELAY
0 = DISABLE
Advertisement
Table of Contents
