Parameter Modes; How To Select A Parameter And Change Its Value - ABB ACS150 series User Manual

0.37...4kw; 0.5...5 hp
Hide thumbs Also See for ACS150 series:
Table of Contents

Advertisement

Parameter modes

There are two parameter modes: Short parameter mode and Long parameter mode.
Both function identically, except that the Short parameter mode shows only the
minimum number of parameters typically required to set up the drive (see section
Parameters in the Short parameter mode
shows all user parameters including those shown in the Short parameter mode.
In the Parameter modes, you can:
• view and change parameter values
• start, stop, change direction, switch between local and remote control and set the
frequency reference.

How to select a parameter and change its value

Step
Action
1.
Go to the Main menu by pressing
otherwise by pressing
If the panel is not in the desired Parameter mode ("PAr S"/"PAr L" not
2.
visible), press key
mode) or "PAr L" (Long parameter mode), as appropriate.
3.
Short parameter mode (PAr S):
• Press
. The display shows one of the parameters of the Short
parameter mode. Letter s in the top right corner indicates that you are
browsing parameters in the Short parameter mode.
Long parameter mode (PAr L):
• Press
. The display shows the number of one of the parameter
groups in the Long parameter mode.
• Use keys
• Press
. The display shows one of the parameters in the selected
group.
4.
Use keys
5.
Press and hold
value of the parameter with
value is now possible.
Note: When
SET
simultaneously changes the displayed value to the default value of the
parameter.
if you are in the Output mode,
repeatedly until you see MENU at the bottom.
until you see "PAr S" (Short parameter
or
and
to find the desired parameter group.
and
to find the desired parameter.
for about two seconds until the display shows the
SET
underneath indicating that changing of the
is visible, pressing keys
on page 80). The Long parameter mode
and
Display
rEF
LOC
MENU
FWD
PAr S
LOC
MENU
FWD
PAr L
LOC
MENU
FWD
1202
LOC
PAR
FWD
-01-
LOC
PAR
FWD
-12-
LOC
PAR
FWD
1202
LOC
PAR
FWD
1203
LOC
PAR
FWD
10
0
LOC
.
PAR
SET
FWD
Control panel
65
s
Hz

Advertisement

Table of Contents
loading

Table of Contents