ABB ACS150 series User Manual page 104

Parameters in the Long parameter mode
Index Name/Selection
2205 ACCELER TIME 2
0.0...1800.0 s
2206 DECELER TIME 2
0.0...1800.0 s
2207 RAMP SHAPE 2
0.0 = LINEAR
0.0...1000.0 s
2208 EMERG DEC TIME
0.0...1800.0 s
2209 RAMP INPUT 0
0 = NOT SEL
1 = DI1
2 = DI2
3 = DI3
4 = DI4
5 = DI5
-1 = DI1(INV)
-2 = DI2(INV)
-3 = DI3(INV)
-4 = DI4(INV)
-5 = DI5(INV)
Description
Defines the acceleration time 2, that is the time required for the speed to
change from zero to the speed defined by parameter
See parameter 2202 ACCELER TIME 1.
Acceleration time 2 is used also as jogging acceleration time. See parameter
1010 JOGGING SEL.
Time
Defines the deceleration time 2, that is the time required for the speed to
change from the value defined by parameter
See parameter 2203 DECELER TIME 1.
Deceleration time 2 is used also as jogging deceleration time. See parameter
1010 JOGGING SEL.
Time
Selects the shape of the acceleration/deceleration ramp 2. The function is
deactivated during emergency stop
Ramp shape 2 is used also as jogging ramp shape time. See parameter
JOGGING SEL.
See parameter 2204 RAMP SHAPE 1.
Defines the time within which the drive is stopped if an emergency stop is
activated. See parameter
Time
Defines the source for forcing the ramp input to zero.
Not selected
Digital input DI1. 1 = ramp input is forced to zero. Ramp output ramps to zero
according to the used ramp time.
See selection DI1.
See selection DI1.
See selection DI1.
See selection DI1.
Inverted digital input DI1. 0 = ramp input is forced to zero. Ramp output
ramps to zero according to the used ramp time.
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
See selection DI1(INV).
2008 MAXIMUM FREQ to zero.
(2109 EMERG STOP SEL).
2109 EMERG STOP SEL.
Def
60.0 s
2008 MAXIMUM FREQ.
60.0 s
0.0 = LINEAR
1010
1.0 s
0 = NOT SEL
Actual signals and parameters
103