Info-Center Source - HP MSR1003-8S Command Reference Manual

info-center source

Use info-center source to configure a log output rule for a module.
Use undo info-center source to restore the default.
Syntax
info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor } { deny
| level severity }
undo info-center source { module-name | default } { console | logbuffer | logfile | loghost | monitor }
Default
Table 92 lists the default log output rules.
Table 92 Default output rules
Destination
Console
Monitor
terminal
Log host
Log buffer
Log file
Security log
file
Diagnostic
log file
Views
System view
Predefined user roles
network-admin
Parameters
module-name: Specifies a module by its name. For instance, to output FTP information, set this argument
to FTP. You can use the info-center source ? command to view the modules supported by the device.
default: Specifies all modules, which can be displayed by using the info-center source ? command.
console: Outputs logs to the console.
logbuffer: Outputs logs to the log buffer.
logfile: Outputs logs to a log file.
Source
Common log
modules
All supported
debugging
modules
All supported
debugging
modules
All supported
informational
modules
All supported
informational
modules
All supported
informational
modules
All supported
modules, cannot Disabled
be filtered
All supported
modules, cannot Disabled
be filtered
Security log
Disabled
Disabled
Disabled
Disabled
Disabled
Debugging, which
cannot be filtered
Disabled
439
Diagnostic log Hidden log
Disabled Disabled
Disabled Disabled
Disabled informational
Disabled informational
Disabled informational
Disabled Disabled
Debugging,
which cannot be Disabled
filtered