Ipv6 Netstream Export V9-Template Refresh-Rate Packet; Ipv6 Netstream Export V9-Template Refresh-Rate Time - HP MSR1003-8S Command Reference Manual

Related commands
ipv6 netstream aggregation

ipv6 netstream export v9-template refresh-rate packet

Use ipv6 netstream export v9-template refresh-rate packet to configure the refresh frequency (in packets)
for IPv6 NetStream version 9 templates. The templates are sent after the specified number of packets are
sent.
Use undo ipv6 netstream export v9-template refresh-rate packet to restore the default.
Syntax
ipv6 netstream export v9-template refresh-rate packet packets
undo ipv6 netstream export v9-template refresh-rate packet
Default
Version 9 templates are sent every 20 packets.
Views
System view
Predefined user roles
network-admin
Parameters
packets: Specifies the number of packets that are sent before version 9 templates are sent to NetStream
servers for an update. The value range is 1 to 600.
Usage guidelines
An IPv6 NetStream server uses version 9 templates to parse the data from the NetStream device, but the
server does not permanently save version 9 templates.
For an IPv6 NetStream server to use correct version 9 templates, configure the refresh frequency or
refresh interval for version 9 templates. If both settings are configured, templates are sent when either of
the conditions is met.
To configure the refresh interval for version 9 templates, use the ipv6 netstream export v9-template
refresh-rate time command.
Examples
# Configure the device to send IPv6 NetStream version 9 templates every 100 packets.
<Sysname> system-view
[Sysname] ipv6 netstream export v9-template refresh-rate packet 100
Related commands

ipv6 netstream export v9-template refresh-rate time

ipv6 netstream export v9-template refresh-rate time
Use ipv6 netstream export v9-template refresh-rate time to configure the refresh interval for IPv6
NetStream version 9 templates.
Use undo ipv6 netstream export v9-template refresh-rate time to restore the default.
403