Monitor Kernel Deadloop Time - HP MSR1003-8S Command Reference Manual

Msr series network management and monitoring
Hide thumbs Also See for MSR1003-8S:
Table of Contents

Advertisement

Parameters
tid: Specifies a kernel thread by its ID, in the range of 1 to 2147483647. If no kernel thread is specified
for the undo command, the default is restored.
slot slot-number: Specifies an MPU by its slot number. If you do not specify this option, the active MPU is
specified. (Distributed devices in standalone mode.)
slot slot-number: Specifies an IRF member device by its ID. If you do not specify this option, the master
device is specified. (Centralized devices in IRF mode.)
chassis chassis-number slot slot-number: Specifies an MPU on an IRF member device. If you do not
specify this option, the global active MPU is specified. (Distributed devices in IRF mode.)
cpu cpu-number: Specifies a CPU by its number. (Distributed devices in standalone or IRF
mode/centralized devices in IRF mode.)
Usage guidelines
You can disable kernel thread deadloop detection for up to 128 kernel threads by executing the
command.
Inappropriate use of the command can cause service problems or system breakdown. Make sure you
understand the impact of the command on your network before you use it.
Examples
# Disable kernel thread deadloop detection for kernel thread 15.
<Sysname> system-view
[Sysname]monitor kernel deadloop exclude-thread 15
Related commands
display kernel deadloop configuration
display kernel deadloop
monitor kernel deadloop enable

monitor kernel deadloop time

monitor kernel deadloop time
Use monitor kernel deadloop time to set the interval for identifying a kernel thread deadloop.
Use undo monitor kernel deadloop time to restore the default.
Syntax
Centralized devices in standalone mode:
monitor kernel deadloop time interval
undo monitor kernel deadloop time
Distributed devices in standalone mode/centralized devices in IRF mode:
monitor kernel deadloop time interval [ slot slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop time [ slot slot-number [ cpu cpu-number ] ]
Distributed devices in IRF mode:
monitor kernel deadloop time interval [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
undo monitor kernel deadloop time [ chassis chassis-number slot slot-number [ cpu cpu-number ] ]
338

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents