Ip Netstream Max-Entry; Ip Netstream Mpls - HP MSR1003-8S Command Reference Manual

<Sysname> system-view
[Sysname] ip netstream export version 5 origin-as

ip netstream max-entry

Use ip netstream max-entry to set the upper limit for NetStream entries.
Use undo ip netstream max-entry to restore the default.
Syntax
ip netstream max-entry max-entries
undo ip netstream max-entry
Default
The upper limit for NetStream entries is 10000.
Views
System view
Predefined user roles
network-admin
Parameters
max-entries: Specifies the upper limit for NetStream entries that the cache can accommodate. The value
range is 1000 to 100000.
• This argument applies to each card. (Distributed devices in standalone mode.)
This argument applies to each card of each IRF member device. (Distributed devices in IRF mode.)
•
This argument applies to each IRF member device. (Centralized devices in IRF mode.)
•
Usage guidelines
If you execute this command multiple times, the most recent configuration takes effect.
When the number of NetStream entries reaches the upper limit, all NetStream entries are automatically
aged out. The entry statistics are then exported to the NetStream server and cleared in the cache.
Examples
# Set the upper limit to 5000 for NetStream entries.
<Sysname> system-view
[Sysname] ip netstream max-entry 5000

ip netstream mpls

Use ip netstream mpls to collect and export statistics on MPLS packets. If you do not specify any
keywords or options, the top label and IP fields are also counted.
Use undo ip netstream mpls to restore the default.
Syntax
ip netstream mpls [ label-positions label-position1 [ label-position2 [ label-position3 ] ] ] [ no-ip-fields ]
undo ip netstream mpls
382