HP MSR1003-8S Command Reference Manual page 388

Use undo ip netstream export host to remove the specified destination host or all destination hosts that
are configured in the current view.
Syntax
ip netstream export host ip-address udp-port [ vpn-instance vpn-instance-name ]
undo ip netstream export host [ ip-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view, NetStream aggregation mode view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IP address.
udp-port: Specifies the destination UDP port number in the range of 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the destination host
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.
Usage guidelines
You can specify the same destination host in different NetStream aggregation mode views.
The destination hosts in a NetStream aggregation mode view take precedence over those in system view.
If no destination host is specified in a NetStream aggregation mode view, the destination host in system
view applies.
You can specify a maximum of four destination hosts in system view or a NetStream aggregation mode
view. If you specify a destination host with the same IP address but different UDP ports in the same view,
the most recent configuration takes effect. You can specify destination hosts with the same IP address and
UDP port but different VPN instances.
NetStream traditional data are exported to all destination hosts in system view. NetStream aggregation
data are exported to all destination hosts in the related NetStream aggregation mode view.
If you expect only the aggregation data, specify destination hosts only in the NetStream aggregation
mode view. This setting reduces bandwidth usage.
Examples
# In system view, specify 172.16.105.48 as the IP address of the destination host and UDP port 5000 as
the export destination port number.
<Sysname> system-view
[Sysname] ip netstream export host 172.16.105.48 5000
# In AS aggregation mode view, specify 172.16.105.50 as the IP address of the destination host and UDP
port 6000 as the export destination port number.
<Sysname> system-view
[Sysname] ip netstream aggregation as
[Sysname-ns-aggregation-as] ip netstream export host 172.16.105.50 6000
377