HP MSR1003-8S Command Reference Manual page 300

slot slot-number: Specifies a card by its slot number. If you do not specify a card, this command reboots
all cards. (Distributed devices in IRF mode.)
slot slot-number: Specifies an IRF member device by its member ID. If you do not specify a member
device, the command reboots all IRF member devices. (Centralized devices in IRF mode.)
subslot subslot-number: Specifies a subcard by its slot number. If you do not specify a subcard, the
command reboots all subcards.
The following matrix shows the subslot subslot-number option and hardware compatibility:
Hardware
MSR1002-4/1003-8S
MSR2003
MSR2004-24/2004-48
MSR3012/3024/3044/3064
MSR4060/4080
Usage guidelines
You can configure a series of actions to be executed in response to the event specified in a monitor policy.
If two actions have the same ID, the most recent one takes effect.
EAA executes the actions in ascending order of action IDs. When you add actions to a policy, you must
make sure the execution order is correct.
The reboot action configured with this command reboots devices or cards without saving the running
configuration. If you want to save the running configuration, use the action cli command to configure
reboot actions.
When you define an action, you can choose to specify a value or specify a variable name for an
argument. For more information about using EAA environment variables, see
Examples
# (Distributed devices in standalone mode/centralized devices in standalone mode.) Configure an
action for the CLI-defined policy test to reboot the device.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] action 3 reboot
# (Centralized devices in IRF mode.) Configure an action for the CLI-defined policy test to reboot IRF
member device 1.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] action 3 reboot slot 1
# (Distributed devices in IRF mode.) Configure an action for the CLI-defined policy test to reboot IRF
member device 1.
<Sysname> system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] action 3 reboot chassis 1
Option compatibility
No
No
No
No
Yes
289
"rtm environment."