Event Snmp Oid - HP MSR1003-8S Command Reference Manual

Examples
# Configure a CLI-defined policy to monitor all instances of the process snmpd for restart events.
<Sysname>system-view
[Sysname] rtm cli-policy test
[Sysname-rtm-test] event process restart name snmpd

event snmp oid

Use event snmp oid to configure an SNMP event for a CLI-defined monitor policy.
Use undo event to delete the event in a CLI-defined monitor policy.
Syntax
event snmp oid oid monitor-obj { get | next } start-op start-op start-val start-val restart-op restart-op
restart-val restart-val [ interval interval ]
undo event
Default
No SNMP events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
oid oid: Specifies the OID of the monitored MIB variable, a string of 1 to 256 characters.
monitor-obj { get | next }: Specifies the SNMP operation used for sampling variable values. The get
keyword represents the SNMP get operation, and the next keyword represents the SNMP getNext
operation.
start-op start-op: Specifies the operator for comparing the sampled value with the start threshold. The
start threshold is crossed if the comparison result meets the condition. For keywords available for the
start-op argument, see
start-val start-val: Specifies the start threshold to be compared with the sampled value. The start-val
argument can be any data type supported by SNMP, including numerals and character strings. The CLI
online help system displays the value range as character strings of 1 to 512 characters. If the threshold
value contains spaces, you must enclose the value in quotation marks (" ").
restart-op op: Specifies the operator for comparing the sampled value with the restart threshold. The
restart threshold is crossed if the comparison result meets the condition. For keywords available for the
start-op argument, see
restart-op restart-val: Specifies the restart threshold to be compared with the sampled value. The
restart-val argument can be any data type supported by SNMP, including numerals and character strings.
The CLI online help system displays the value range as character strings of 1 to 512 characters. If the
threshold value contains spaces, you must enclose the value in quotation marks (" ").
interval interval: Specifies the sampling interval in the range of 1 to 4294967295 seconds. The default
is 300 seconds.
Table 62.
Table 62.
300