Cwmp Acs Default Url - HP MSR1003-8S Command Reference Manual

password: Specifies the password string. This argument is case sensitive. If you specify the simple
keyword, it must be a string of 1 to 255 characters. If you specify the cipher keyword, it must be a
ciphertext string of 33 to 373 characters.
Usage guidelines
You can configure only one password for authentication to the default ACS URL. If you use the command
multiple times, the password configured most recently takes effect.
For a successful connection, make sure the CPE has the same password setting as the ACS.
You do not need to configure this command if the default ACS URL does not require a password for
authentication.
Examples
# Configure the password used for authentication to the default ACS URL.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp acs default password simple newpsw
Related commands
•

cwmp acs default url

cwmp acs default username
•
cwmp acs default url
Use cwmp acs default url to specify a default ACS URL.
Use undo cwmp acs default url to restore the default.
Syntax
cwmp acs default url url
undo cwmp acs default url
Default
No default ACS URL is specified.
Views
CWMP view
Predefined user roles
network-admin
Parameters
url: Specifies the default ACS URL, a string of 8 to 255 characters. The URL must use the
http://host[:port]/path or https://host[:port]/path format.
Usage guidelines
The CPE attempts to connect to the default ACS URL if no ACS URL has been assigned to it through the
cwmp acs url command or DHCP.
You can configure only one default ACS URL. If you use the command multiple times, the final URL
configuration takes effect.
271