Ipv6 Netstream Export Host - HP MSR1003-8S Command Reference Manual

protocol-port: Specifies the protocol-port aggregation by protocol number, source port, and destination
port.
source-prefix: Specifies the source-prefix aggregation by source AS number, source address mask length,
source prefix, and input interface index.
Usage guidelines
In IPv6 NetStream aggregation mode view, you can perform the following tasks:
• Enable or disable the specified IPv6 NetStream aggregation mode.
Configure source interface, destination IPv6 address, and destination port for the IPv6 NetStream
•
data export.
A flow matching multiple aggregation modes is counted as multiple aggregate flows.
Examples
# Set the IPv6 NetStream aggregation mode to AS, and enter IPv6 NetStream AS aggregation mode
view.
<Sysname> system-view
[Sysname] ipv6 netstream aggregation as
Related commands
enable

ipv6 netstream export host

Use ipv6 netstream export host to specify a destination host for the IPv6 NetStream data export.
Use undo ipv6 netstream export host to remove the specified destination host or all destination hosts that
are configured in the current view.
Syntax
ipv6 netstream export host { ip-address | ipv6-address } udp-port [ vpn-instance vpn-instance-name ]
undo ipv6 netstream export host [ ip-address | ipv6-address [ vpn-instance vpn-instance-name ] ]
Default
No destination host is specified.
Views
System view, IPv6 NetStream aggregation mode view
Predefined user roles
network-admin
Parameters
ip-address: Specifies the destination IPv4 address.
Ipv6-address: Specifies the destination IPv6 address.
udp-port: Specifies the destination UDP port number in the range of 0 to 65535.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance to which the destination host
belongs. The vpn-instance-name argument is a case-sensitive string of 1 to 31 characters. If the
destination is on the public network, do not specify this option.
400