HP MSR1003-8S Command Reference Manual page 400

SamplerMode:
Active: 660
IP& 2003::1(2048)
IP& 2010::1(1024)
MPLS LDP(4.4.4.4/24)
TcpFlag:
DstMask:
DstAS:
NextHop:
BGPNextHop:
InVRF:
SamplerMode:
Active: 382
Table 82 Command output
Field
Active flow timeout
Inactive flow timeout
Max number of entries
IPv6 active flow entries
MPLS active flow entries
IPL2 active flow entries
IPv6 flow entries counted
MPLS flow entries counted
IPL2 flow entries counted
Last statistics resetting time
IPv6 packet size distribution
(1103746packets in total):
3:30-6-1
0 SamplerInt:
Bytes/Pkt: 100
2008::1(0)
2020::1(67)
1:55-6-0
2:16-6-1
3:0-0-0
0
24 SrcMask:
0 SrcAS:
2020::2
0:0:0:0:0:0:0:0
0
0 SamplerInt:
Bytes/Pkt: 1426
Description
Aging timer for active flows, in minutes.
Aging timer for inactive flows, in seconds.
Maximum number of IPv6 flows allowed in the cache.
Number of active IPv6 flows in the cache.
Number of active IPv6 MPLS flows in the cache.
Number of active Layer 2 flows with IPv6 protocol information.
Number of IPv6 flows that have been counted.
Number of MPLS flows that have been counted.
Number of Layer 2 flows (with IPv6 protocol information) that
have been counted.
Last time the reset ipv6 netstream statistics command was
executed. This field displays Never if you have never executed
this command.
Distribution of IPv6 packets by packet size, and the bracketed
number is the total number of IPv6 packets.
The value is displayed in the proportion of the number of IPv6
packets of the specified sizes to the total number of IPv6 packets.
The value is displayed with three decimal places.
389
0
1 0 0x0
17 255 0x12345 GE2/0/3(I)
24
0
0
GE2/0/2(O) 10
1848