Mirroring-Group Monitor-Port (System View) - HP MSR1003-8S Command Reference Manual

[Sysname] mirroring-group 1 local
[Sysname] interface gigabitethernet 2/0/1
[Sysname-GigabitEthernet2/0/1] mirroring-group 1 monitor-port
Related commands
mirroring-group

mirroring-group monitor-port (system view)

Use mirroring-group monitor-port to configure a port as the monitor port for a mirroring group.
Use undo mirroring-group monitor-port to remove the monitor port from a mirroring group.
Syntax
mirroring-group group-id monitor-port interface-type interface-number
undo mirroring-group group-id monitor-port interface-type interface-number
Default
No monitor port is configured for a mirroring group.
Views
System view
Predefined user roles
network-admin
Parameters
group-id: Specifies a mirroring group by its number in the range of 1 to 6. The specified mirroring group
must already exist.
interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
Use a monitor port only for port mirroring, so the data monitoring device receives only the mirrored
traffic.
Do not configure a port of an existing mirroring group as a monitor port.
Examples
# Create local mirroring group 1 and configure GigabitEthernet 2/0/1 as its monitor port.
<Sysname> system-view
[Sysname] mirroring-group 1 local
[Sysname] mirroring-group 1 monitor-port gigabitethernet 2/0/1
Related commands
mirroring-group
360