Cwmp Cpe Inform Interval Enable - HP MSR1003-8S Command Reference Manual

Views
CWMP view
Predefined user roles
network-admin
Parameters
seconds: Sets the periodic Inform interval in the range of 10 to 86400 seconds.
Usage guidelines
This command sets the interval for the CPE to send Inform messages automatically to the ACS. For the
command to take effect, you must configure the cwmp cpe inform interval enable command.
Examples
# Set the periodic Inform interval to 3600 seconds.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform interval enable
[Sysname-cwmp] cwmp cpe inform interval 3600
Related commands

cwmp cpe inform interval enable

cwmp cpe inform interval enable
Use cwmp cpe inform interval enable to enable the periodic Inform feature.
Use undo cwmp cpe inform interval enable to restore the default.
Syntax
cwmp cpe inform interval enable
undo cwmp cpe inform interval enable
Default
The CPE does not send Inform messages periodically.
Views
CWMP view
Predefined user roles
network-admin
Usage guidelines
If this command is configured, the CPE sends Inform messages regularly to establish a CWMP session
with the ACS. To set the periodic Inform interval, use the cwmp cpe inform interval command.
Examples
# Enable the periodic Inform feature.
<Sysname> system-view
[Sysname] cwmp
[Sysname-cwmp] cwmp cpe inform interval enable
277