Display Ipv6 Netstream Export - HP MSR1003-8S Command Reference Manual

Field
TopLblType(IP/MASK)
TcpFlag:
DstMask: SrcMask:
DstAS:
NextHop:
BGPNextHop:
OutVRF:
SamplerMode:
Active:

display ipv6 netstream export

Use display ipv6 netstream export to display information about the IPv6 NetStream data export.
Syntax
display ipv6 netstream export
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display information about the IPv6 NetStream data export.
<Sysname> display ipv6 netstream export
as aggregation export information:
Lbl-Exp-S-List
SrcAS:
InVRF:
SamplerInt:
Bytes/Pkt:
Description
Information about the active MPLS flows in the current cache:
•
Type of the labels at the top of the label stack:
IP address associated with the label.
Mask associated with the label.
•
Label list:
Lbl—20-bit label value.
Exp—3-bit field for implementing QoS.
S—1-bit bottom of stack flag. The S field is set to 1 if the
label is the bottom label and set to 0 if not.
Other information about the active flows in the cache:
•
TCP flag.
•
Destination mask.
•
Source mask.
•
Destination AS.
•
Source AS.
•
Routing next hop.
•
BGP next hop.
•
VPN to which the outbound packets belong.
•
VPN to which the inbound packets belong.
•
Sampling mode. IPv6 NetStream supports the following
sampling modes:
0—No sampling.
1—Fixed sampling.
2—Random sampling.
•
Sampling interval.
•
Flow's active time.
•
Number of bytes per packet.
391