HP MSR1003-8S Command Reference Manual page 378

Field
Type DstIP(Port) SrcIP(Port)
Pro ToS If(Direct) Pkts
DstMAC(VLAN) SrcMAC(VLAN)
TopLblType(IP/Mask)
Description
Statistics of the active flows in the current cache:
•
Flow type. Flows are classified into the following types:
IP flows.
L2 flows.
IP&L2 flows.
MPLS flows without IP options.
MPLS flows with IP options.
•
Destination IP address (destination port).
•
Source IP address (source port).
•
Protocol number.
•
ToS.
•
Interface name (direction).
•
Number of packets.
ICMP packets do not contain port number fields, so the type and code
fields are captured. The value for the destination port represents these
two fields:
•
The highest 8 bits represent the type field.
•
The lowest 8 bits represent the code field.
The value for the source port is set to 0 and does not indicate any
statistics.
Layer 2 information of the active flows in the current cache:
•
Destination MAC address.
•
Destination VLAN ID.
•
Source MAC address.
•
Source VLAN ID.
Information about the active MPLS flows in the current cache:
•
Type of the labels at the top of the label stack:
IP address associated with the label.
Lbl-Exp-S-List
Mask associated with the label.
•
Label list.
Up to three labels can be listed in one label list.
367