Display Snmp Mib Event Trigger - HP MSR1003-8S Command Reference Manual

Field
SampleInstancesHigh
SampleInstanceLacks
Related commands
display snmp mib event

display snmp mib event trigger

Use display snmp mib event trigger to display information about a trigger and the trigger test.
Syntax
display snmp mib event trigger [ owner trigger-owner name trigger-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
owner trigger-owner name trigger name: Specifies a trigger by its owner and name. If you do not specify
a trigger, this command displays information about all triggers and trigger tests.
Examples
# Display information about the trigger with the owner owner1 and the name triggerA and the trigger
tests.
<Sysname> display snmp mib event trigger owner owner1 name triggerA
Trigger entry triggerA owned by owner1:
TriggerComment
TriggerTest
TriggerSampleType
TriggerValueID
TriggerValueIDWildcard
TriggerTargetTag
TriggerContextName
TriggerContextNameWildcard
TriggerFrequency(in seconds): 600
TriggerObjOwner
TriggerObjName
TriggerEnabled
Existence entry:
ExiTest
ExiStartUp
ExiObjOwner
ExiObjName
Description
Maximum number of sampled instances.
Number of sampling failures after the maximum number of sampling instances is
reached.
: triggerA is to monitor the state of the interface
: existence | boolean | threshold
: absoluteValue
: 1.3.6.1.2.1.2.2.1.7.3<ifAdminStatus.3>
: false
: N/A
: context1
: true
: owner1
: obj1
: true
: present | absent
: present | absent
: owner1
: object1
237