Display Logbuffer Summary - HP MSR1003-8S Command Reference Manual

# (Distributed devices in IRF mode.) Display the state and log information of the log buffer.
<Sysname> display logbuffer chassis 0 slot 1
Log buffer: Enabled
Max buffer size: 1024
Actual buffer size: 512
Dropped messages: 0
Overwritten messages: 0
Current messages: 127
%Jun 19 18:03:24:55 2006 Sysname SYSLOG/7/SYS_RESTART:System restarted
...
Table 88 Command output
Field
Log buffer
Max buffer size
Actual buffer size
Dropped messages
Overwritten messages
Current messages
Related commands
info-center logbuffer
•
• reset logbuffer

display logbuffer summary

Use display logbuffer summary to display the summary of the log buffer.
Syntax
Centralized devices in standalone mode:
display logbuffer summary [ level severity ]
Distributed devices in standalone mode/centralized devices in IRF mode:
display logbuffer summary [ level severity | slot slot-number ] *
Distributed devices in IRF mode:
display logbuffer summary [ level severity | chassis chassis-number slot slot-number ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Description
•
Enabled—Logs can be output to the log buffer.
•
Disabled—Logs cannot be output to the buffer.
Maximum buffer size supported by the device.
Maximum buffer size configured by using the
info-center logbuffer size command.
Number of dropped messages.
Number of overwritten messages.
Number of current messages.
420