Mitsubishi Electric R16MTCPU Programming Manual page 255

[Direct specification]
Data type specified with (S3)
16-bit integer value type
32-bit integer value type
64-bit floating-point type
Character string
If the floating-point data is transferred to the vision system, it is handled as 32-bit floating-point data. The
number of effective digits is approx. 7 digits. Data in the seven digits or later may not match the (S3) data.
• (S4) is set in increments of 10ms. When the setting is omitted, the timeout time is 10 seconds (same as setting 1000).
Operation error
An operation error will occur if:
• The (S1) data is outside the range of 1 to 32.
• The number of character string of spreadsheet cell or tag specified with (S2) outside the range of 1 to 32 bytes.
• The spreadsheet cell or tag specified with (S2) does not exist.
• The data type of spreadsheet cell or tag specified with (S2) is different from data format specified with (S3).
• The (S3) data is outside the range.
• The (S4) data is outside the range of 1 to 32767.
• The vision system specified with (S1) has not been logged on.
• The vision system parameter setting is different from the setting on the vision system.
• The reading data is not completed when the specified timeout time has elapsed.
Program example
■Program which transfers the floating-point value stored in D3000F to the tag
"Calib_1.World_Point0.X" of the vision system (camera) 1
MVOUT K1, "Calib_1.World_Point0.X", D3000F
Setting example
K12345
K12345678L
K1234.5
"MITSUBISHI"
4 OPERATION CONTROL PROGRAMS
4.17 Vision System Dedicated Function
4
253