Ip Phone Registration Modes - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

15.1 IP Phone Registration Modes

The SIP MLT supports three different registration modes.

Plug and Play

Automatic Login

Manual Login

Plug and Play Registration

Plug and play registration mode allows for no authentication. As long as an IP

terminal is configured with the proper IP addressing scheme, and plugged into the

network, the phone comes on-line. In plug and play mode you may assign an

extension number into the IP terminal or allow the system to automatically set an

unused extension number for the station. When the system assigns unused

extension numbers it starts searching for the first available port or starts at a

preassigned port and works its way up from there.

Automatic Login

When set to automatic login the SIP user name and password must be entered in

the configuration in the IP terminal. When the phone tries to register with the CPU

it checks the user name and password against its database. If the user name and

password match, the phone is allowed to complete registration. If the user name

and password do not match, the phone cannot register with the CPU. The IP

terminal displays an error message: Unauthorized Auto Login.

Enter the software version of the

files stored on the TFTP/FTP

Enter the Hardware version of the

IP telephone.

IP Multiline Station (SIP)