Voice Call - K -Ccis - NEC Univerge SV9100 Manual

Hide thumbs Also See for Univerge SV9100:

Table of Contents

This feature provides a voice path, through the K-CCIS network, between a MLT in

one office and a MLT in another office. This path is established from the calling party

to the called party built-in speaker. If the called party MIC is on, the called party can

converse hands-free.

Terminal Type:

All multiline terminals

Required Components:

From one MLT to another MLT:

SV9100 Networking Manual

The originating MLT user dials the desired station number in a different office

and receives ring back tone.

Calling party dials 1. A signal tone is transmitted over the K-CCIS network to

the called party speaker.

The called party can press MIC, or press FEATURE and dial 1 (if the MIC

LED is not on) to allow two-way conversation with the calling party.

The UNIVERGE SV9100 can assign a Feature Access/One Touch Button as a

Voice Call key. This performs the same operation as pressing 1.

Any station in the same system can use Directed Call Pick Up to retrieve the

Voice Call over K-CCIS.

When a Voice Call is sent to a station that is unable to receive voice

announcement, RST is displayed on the originator display.

Voice Call – K -CCIS