Dial Access To Attendant - K-Ccis - NEC Univerge SV9100 Manual

F
EATURE
This feature allows a station user to call an Attendant by dialing a call code through
the K-CCIS network.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
S
YSTEM
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
GPZ-IPLE
O
PERATING
To call an Attendant Position:
1.
2.
S
ERVICE
General:




4-60
D
ESCRIPTION
A
VAILABILITY
- OR -
P
ROCEDURES
Lift the handset or press Speaker.
Dial 9 or the operator call code if it is different from 9.
C
ONDITIONS
The operator call code must be for an individual Attendant Access Code
number.
When calling to a UNIVERGE SV9100 Attendant Position, the SV9100 sends
Operator to the call originator as the name.

Shows Office Code if using Open Numbering Plan.
If using an Open Numbering Plan, and a call is made to an UNIVERGE SV9100
Attendant Position, the operator office code is included with the name.
When making a call from a UNIVERGE SV9100 Attendant Position across a
K-CCIS network, the Caller ID Name and Number display is the same as for a
station-to-station call.
Dial Access to Attendant – K-CCIS
Issue 2.0
Features and Specifications