Table 7-5 H.323 Alias Address Setup Assignments - NEC Univerge SV9100 Manual

Table 7-4 H.323 GateKeeper Setup Assignments (Continued)
Program/ Description/
Item No. Selection
H.323 Gatekeeper Setup –
Preferred Gatekeeper
10-17-04

Table 7-5 H.323 Alias Address Setup Assignments

Program/ Description/
Item No. Selection
H.323 Alias Address Setup –
Alias Address
10-18-01
H.323 Alias Address Setup –
Alias Address Type
10-18-02
7-6
Assigned Data
Maximum 124 characters
Default not assigned
2.3.2 H.323 Alias Address Setup
Use the following programs to assign H.323 alias address setup
information.
Assigned Data
Dial up to 12 digits
(0~9, *, #)
Default not assigned
0 = E164
Default = 0
Comments
If Program 10-17-01 is set to 1, enter
the Gatekeeper ID. When registering
with an external Gatekeeper using
Gatekeeper search, two or more
GRQs (Gate Keeper Request) may
be assigned. In this case, if this ID is
set up, it registers with a Gatekeeper
using the ID set up in this program
(124 characters max).
Comments
Enter the Alias Address of the
UNIVERGE SV9100 system
registered into the external
Gatekeeper.
(12 digits max).
This is the System Code of Local
System.
Define the type of Alias Address
registered to the external Gatekeeper.
At this point, only E.164 can be
entered.
H.323 Trunking
Issue 2.0