NEC Univerge SV9100 Manual page 353

Issue 2.0
System Availability
Related Features
None
S 5 G
ECTION UIDE TO
The Level 1, Level 2 and Level 3 columns indicate the programs that are assigned
when programming this feature in the order they are most commonly used. These
levels are used with PCPro and WebPro wizards for feature programming.


SV9100 Networking Manual
changed to a video call.
A video caller cannot use CTI/OAI at the same time as the CTI/OAI

feature needs P2P to be set to off.
When the video interconnection using a SIP trunk is configured, other

SIP connections, such as a SIP carrier connection is not supported in
the same system.
Video capability in the initial invite message is required for the Video

Terminal.
When using an MCU, the SV9100 requires the Carrier Type Setting

(Program 10-29-14) to be set to 0 = Standard.
When using an MCU, the same video capability must be set between

the MCU and the Video SIP Terminal.
Default Settings
This feature is not enabled at default.
Terminals
Polycom HDX4003

Polycom VVX1500D

Required Component(s)
GCD-CP10 with GPZ-IPLE installed.
F P
EATURE ROGRAMMING
Level 1 – these are the most commonly assigned programs for this feature.
Level 2 – these are the next most commonly assigned programs for this
6-7