Codec Selection For Ip Networking - NEC Univerge SV9100 Manual

Issue 2.0
2.5
SV9100 Networking Manual
The CLIP that is actually sent is based on the following priority:

CODEC Selection for IP Networking

IP Networking can use various CODECs. A CODEC is a standard for converting
an analog signal to digital. This conversion process is handled by the DSP (Digital
Signal Processors) on VoIP Daughter Board.
Each CODEC has different voice quality and compression properties. The correct
choice of CODEC is based on the bandwidth available, the number of calls
required, and the voice quality required.
7-9