Department Calling - NEC Univerge SV9100 Manual

Issue 2.0

3.11 Department Calling

epartment Calling
Department Group access is available via Networking. When the extension at System A tries to make a
Department Call to System B, System A should have a numbering plan which defines the Department
Access code at System-B (must be defined as dial type 8, Networking in Program 11-01: System Number-
ing).
The following Department Calling options are supported with the Networking feature.
Operation
1. When dialing the Department access code for the networked system, the call is dialed in the same way
as normal.
2. A Department Call from the outgoing system will be routed to an available extension in the Department
Group.
Related Programs
SV9100 Networking Manual
Program Number
16-01-02
Department Calling Cycle
16-01-03
Department Routing When Busy
16-01-04
Hunting Mode
16-01-05
All Ring Mode
16-01-06
STG Withdraw Mode
16-01-07
Call Recall Restriction for STG
16-01-08
Maximum Queuing Number
16-01-10
Enhanced Hunting Mode
Program Number
11-07-01
Department Group Pilot Numbers
16-01
Department Group Basic Data Setup
16-02-01
Department Group Assignment for Extensions
22-07-01
DIL Assignment
22-11-02
DDI
Mode
When a call is transferred to a Depart-
ment Group with All Ring, there is a
difference in operation. In a single sys-
tem, an extension within the same sys-
tem can transfer a call to a Department
Group and the call will ring an exten-
sion within the Department Group once
the transferring user hangs up. In a net-
worked system, the transfer will not go
through and the call will recall the
extension performing the transfer.
Title
Same as Single System
Yes
Yes
No
No
No
No
No
13-29