Paging Access - K-Ccis - NEC Univerge SV9100 Manual

F
EATURE
This feature allows users to access internal or external paging from remote sites
across the K-CCIS network. Local stations where the external paging equipment is
installed can use the Meet-Me Answer feature to answer the page and establish a
station-to-station K-CCIS call.
For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
S
YSTEM
Terminal Type:
All multiline terminals
Required Components:
GCD-CCTA
GPZ-IPLE
O
PERATING
To access internal or external paging across a K-CCIS network:
1.
2.
S
ERVICE
General:



4-92
D
ESCRIPTION
A
VAILABILITY
- OR -
P
ROCEDURES
Lift the handset or press Speaker.
Dial the Access Code for the required zone, or press the programmed
Feature Access or One-Touch key.
C
ONDITIONS
The single external paging zone output built into the basic B64-U20 KSU can
be used for Paging Access – (K-CCIS).
Program 31-01-02 (Paging Announcement Duration) applies to
Paging Access – (K-CCIS).
If a user dials during Paging Access – (K-CCIS), DTMF tones are heard from
the external paging equipment at the remote site.
Paging Access – K-CCIS
Features and Specifications
Issue 2.0