15
When restoring the OS with ServerConductor/Deployment Manager after
.
configuring and initializing a virtual drive, execute
on page
Full initialization procedure
This subsection describes how to execute full initialization.
1
On Configuration Options window, select Virtual Drive Management
.
and press Enter.
2
Virtual Drive management window appears. Select Select Virtual Drive
.
Operations and press Enter.
3
Select Virtual Drive Operations window appears. Select Select Virtual
.
Drive and press Enter.
4
The following subwindow appears in the middle of the Select Virtual Drive
.
Operations window. Select a virtual drive to initialize and press Enter.
Tip: The figure above is a window when two drives are used as a single
physical drive.
5
Select Virtual Drive Operation and press Enter.
.
6-53.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
Setting virtual drives
6-31