Hitachi Compute Blade 500 Series User Manual page 213

Key/mouse
Mouse – left button •
•
•
Tip: Connect a mouse to the remote console before starting MegaRAID
WebBIOS.
Key
[Tab]
2
[Shift] + [Tab]
[Enter], [Space]
[(], [(]
[Shift] , [Ctrl]
[0] to [9]
[Delete], [Back Space]
Notes:
1 The item selected by the cursor is encircled by the dotted line.
.
2 This indicates that you should press and hold the Shift key and press the Tab key.
.
Note: The main menu of the MegaRAID WebBIOS utility includes Menu Icon,
which is not used in operation with the keyboard.
Tip: It may be hard to find the cursor on some windows. In this case, press
Tab key or Shift + Tab keys to find the cursor, and then move the cursor to
the position where you want to move it.
When operating MegaRAID WebBIOS only with the keyboard, replace the
mouse with the keyboard as follows:
• "Click (an object)."
Put the cursor on (the object) and press Enter or Space.
• "Click a check mark on (an object)."
Put the cursor on (the object) and press Enter or Space.
Execute a specific operation in setting or configuring a disk array as follows:
• Click Menu > Logical View > Physical View in the main menu:
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
Selects an item that the mouse cursor is placed on.
Moves the cursor to an item to which the mouse cursor points.
Selects a disk array or physical disk.
Table 4-2 Keys
Moves the cursor in order.
Moves the cursor in reverse order.
• Selects the item that the cursor is placed on.
• Determines an item setting.
• Determines a disk array or physical disk.
• Selects a disk array or physical disk.
• Selects a setting value.
Selects multiple disk arrays or disks.
Enters a numerical value.
Deletes an entered value.
Operation
Operation
1
4-3