Hitachi Compute Blade 500 Series User Manual page 397
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
Tip:
•
Only Unconfigured Good physical drives can be selected.
•
To cancel a selected drive, select the drive and press the space key.
7
Select Drives Target ID: 1: SATA (a drive in slot 1) SATA, xxxx.xxxx
.
GB, Unconfigured Good (a drive recognized as Unconfigured Good).
Press the space key.
Tip:
•
Only Unconfigured Good physical drives can be selected.
•
To cancel a selected drive, select the drive and press the space key.
8
Select all drives required for virtual drive configuraion. Then select Apply
.
Changes and press Enter.
9
Virtual Drive Management > Create Configuration > Select Drives >
.
Success message appears. With OK selected, press Enter.
10
The window returns to Create Configuraion. Select Save Configuration
.
and press Enter.
11
Virtual Drive Management > Create Configuration > Warning appears.
.
Select Yes and press Enter.
Tip: When you select No, the configuration will not saved and the window
returns to Create Configuration window.
12
Virtual Drive Management > Create Configuration > Success message
.
appears. With OK selected, press Enter.
LSI Software RAID Configuration Utility for disk arrays
Hitachi Compute Blade 500 Series EFI User's Guide
6-19
Hide quick links:
Advertisement
Table of Contents
