Hitachi Compute Blade 500 Series User Manual page 161

Menu items
HostInterface
Firmware Version
FW Package Version
Firmware Time
WebBIOS Version
Drive Count
Unconfig Good SpinDown
FRU
Drive Security Capable
PortCount
NVRAM Size
Memory Size
Min Strip Size
Max Strip Size
Virtual Drive Count
Hot Spare Spin Down
Drive Standby Time
Tip: You cannot change the settings for those items displayed above.
Controller properties submenu 1
Click Next in the Controller Information window. The following Controller
Properties window is displayed.
If you want to change the setting, select or input the value from the pulldown
menu.
If you want to indicate another controller property, click Next.
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide
Host interface
Firmware version
Firmware package version
Current time that firmware recognizes
MegaRAID WebBIOS version
Number of installed physical devices
SpinDown setting mode for unused disks
Board names for maintenance
Physical drive security capability: Yes or No
Number of installed ports
Size of installed NVRAM
Size of installed memory
Minimum strip size
Maximum strip size
Existing number of array configurations (logical devices)
Disk spin-down mode set to HotSpare.
Processing time required before Drive Standby starts
Description
3-11