Uefi; Disk Array Utilities - Hitachi Compute Blade 500 Series User Manual

6 The remote console window is displayed.
.
Tip:
•
•
7 The system console can be connected the server blade for starting the
.
remote console.
And then start setup menus of UEFI, disk array utilities, Emulex PXE
BIOS, iSCSISELECT utilities, and mezzanine card BIOS utilities after
starting the remote console.

UEFI

UEFI (Unified EFI) is the Firmware for a server blade. You can use a server
blade as default setting. To change the boot order or other settings, see
Chapter 2, UEFI setup

Disk array utilities

One of the three utilities is used depending on the model or RAID controller.
Utilities include Software RAID BIOS (SWR BIOS), Integrated RAID, and
MegaRAID WebBIOS. Find a utility for your model and disk array controller in
the following table, and set the disk array referring to the specified chapter.
1-4
When starting the remote console, a warning message may be
displayed. For details, see the Hitachi Compute Blade 500 Series
Remote Console User's Guide.
When the type of server blade is CB 520H A1/B1 with BMC of before
01-27, the login screen of Web console is displayed. For details, see
the Hitachi Compute Blade 500 Series Remote Console User's Guide.
menu.
UEFI and BIOS Configuration Overview
Hitachi Compute Blade 500 Series EFI User's Guide