Hitachi Compute Blade 500 Series User Manual page 316
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
For an SMP configuration connected to a 2-blade SMP connect board:
For an SMP configuration connected to a 4-blade SMP connect board:
7
The utility starts up.
.
5-8
- The RAID controller of the primary server blade: "Bus" is identified
with a number from 0 to 127.
- The RAID controller of a non-primary server blade: "Bus" is
identified with a number from 128 to 255.
- The RAID controller of the primary server blade: "Bus" is identified
with a number from 0 to 63.
-The RAID controller of the second non-primary server blade from the
bottom: "Bus" is identified with a number from 64 to 127.
- The RAID controller of the third non-primary server blade from the
bottom: "Bus" is identified with a number from 128 to 191.
- The RAID controller of the fourth non-primary server blade from the
bottom: "Bus" is identified with a number from 192 to 255.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Hide quick links:
Advertisement
Table of Contents
