Hitachi Compute Blade 500 Series User Manual page 216
Hide thumbs
Also See for Compute Blade 500 Series:
- User manual (456 pages) ,
- Management module setup manual (362 pages) ,
- Web console users manual (240 pages)
Table of Contents
Advertisement
When pressing press Ctrl+H keys in the window that the disk array
controller name within a red frame is MegaRAID SAS MR9240-8i, the
MegaRAID WebBIOS for LSI SAS 2008 RAID mezzanine card is started.
The MegaRAID WebBIOS for the disk array controller compatible with the
storage expansion blade is not started. If the MegaRAID WebBIOS for the
LSI SAS 2008 RAID mezzanine card is started by mistake, reboot the
system unit after the MegaRAID WebBIOS is exited.
3
The MegaRAID WebBIOS is started and Adapter Selection appears.
.
4
Press Ctrl key on the lower left of the keyboard once.
.
Note: If Ctrl key on the lower left of the keyboard is not pressed, your
keyboard and mouse may not operate properly. If the keyboard or mouse
is not available when you operate MegaRAID WebBIOS, press Ctrl key
once.
5
Confirm the contents of Type in the Adapter Selection window, and
.
then confirm that the disk array controller, LSI MegaRAID SAS 9266-8i
is selected.
When multiple LSI SAS 2008 RAID mezzanine cards are mounted,
multiple disk array controllers are displayed in the Adapter Selection
4-6
MegaRAID WebBIOS for storage expansion blades
Hitachi Compute Blade 500 Series EFI User's Guide
Hide quick links:
Advertisement
Table of Contents
