Hitachi Compute Blade 500 Series User Manual page 327

Tip: Available tasks depend on the physical drive status. Select from a list
displayed.
Menu items
Select operation
Start Locate
Stop Locate
1
Place Drive Offline
1
Place Drive Online
1
Initialize Drive
1
Drive Erase
Make Unconfigured Bad
Make Unconfigured Good
Assign Global Hot Spare
Drive
Unassign Hot Spare Drive
1
Rebuild
Note:
1 Do not select this item which is not supported.
.
Changing advanced settings on a physical drive
Follow the steps below to change advanced settings for a physical drive.
1 Select Advanced, and press Enter.
.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Description
-
Turns on LED of the physical drive.
Turns off LED of the physical drive.
Place the physical drive offline.
Place the physical drive online.
Initializes all areas of the physical
drive.
Initializes all areas of the physical
drive.
1 Make the physical drive Unconfigured
Bad.
1 Make the physical drive Unconfigured
Good.
Assign Global Hot Spare to the
physical drive
Unassign Hot Spare from the physical
drive.
Starts rebuilding.
Reference
-
-
-
-
-
-
-
-
-
Assigning Hotspare
on page 5-41
Unassigning Hotspare
on page 5-43
-
5-19