Hitachi Compute Blade 500 Series User Manual page 322

Advanced...
Note: Do not select RAID 10 that is not supported.
Executing tasks on a virtual drive
Follow the steps below to execute tasks on a virtual drive.
1 Select Operation, and press Enter.
.
2 The following appears in the middle of the window.
.
VirtuaDdrive Erase
Check Consistency
Slow Initialization
Fast Initialization
Reconfigure Virtual
Drives
Delete Virtual Drives
5-14
Menu items
Displays and sets the virtual drive
information in detail.
Menu items
1 Initializes the virtual drive.
Executes consistency check on
the virtual drive.
Initializes all areas of the virtual
drive.
1 Initializes the virtual drive at
high speed.
Expands the virtual drive
capacity.
1
Deletes the virtual drive.
SAS 3004 iMR ROMB Configuration Utility
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Description
Reference
Changing advanced settings
on a virtual drive on page
5-16
Reference
-
Consistency check on
virtual drives on page
5-41
Initializing virtual drives
on page 5-34
-
-
To delete virtual drives
respectively on page
5-39