Hitachi Compute Blade 500 Series User Manual page 156

4 Press Ctrl key once.
.
Note: If Ctrl key is not pressed, your keyboard and mouse may not
operate properly. If the keyboard or mouse is not available when you
operate MegaRAID WebBIOS, press Ctrl key once.
5 View the column of Type in Adapter Selection, and confirm that the
.
disk array controller is "MegaRAID SAS 9240-8i".
6 Press Enter key once.
.
7 The main menu is displayed.
.
3-6
MegaRAID WebBIOS for LSI SAS 2008
Hitachi Compute Blade 500 Series EFI User's Guide