Load Default Settings - Hitachi Compute Blade 500 Series User Manual

System Event Log
Clear System Event Log
Note:
• Do not select this item except when the support service instructed to delete system
event logs.
User Security
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Set Power-On Password
Clear Power-On Password
Set Admin Password
Clear Admin Password
Note:
• Once a password is set, you need to enter the password when completing
the system boot or accessing Configuration/Setup menu. With
configuration of N+M, HA, or automatic bootup of OS, do not set a
password. If you do, password authentication interferes with switching
systems at failover; password authentication function interferes the
server blade startup. Thus, those processes cannot be completed
properly.
• A password must consist of 6 up to 20 any ASCII printable characters.
Save Settings
Select Save Settings and press Enter to save the new settings.
Restore Settings
Select Restore Settings and press Enter to cancel the change in settings
and to restore to the previous settings.

Load Default Settings

Select Load Default Settings and press Enter to cancel the change in
settings and to restore to the factory default settings.
Menu items
Displays system event logs of the server blade.
※1 Deletes system event logs of the server blade.
Table 2-114 User Security menu items
Menu items
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
Description
Description
Sets a power-on password.
Deletes a power-on password.
Sets an administrator password.
Deletes an administrator password.
2-129