Hitachi Compute Blade 500 Series User Manual page 120

Machine Check Recovery
PCI Live Error Recovery
PCIe Isolation
Hardware Memory Dump
Dump Partition
Post Process
Deconfigured Mode
POST Fail Retry
Notes:
1 A value in double angle brackets, << >>, shows the default.
.
2 These items are displayed but are not available.
.
Security sub menu
Place the cursor on a menu to set, and press Enter.
The following table shows description of menu items displayed in the left side
of the window.
Select a menu to set, and press Enter.
Secure Boot Configuration
Trusted Platform Module
(TPM 1.2)
Trusted Platform Module (TPM 1.2)
Place the cursor on an item to set, and press Enter.
2-100
Table 2-86 RAS Configuration menu items
Menu items
•
•
•
•
•
2
•
•
2
•
No Present
2
2 •
•
•
•
•
•
Table 2-87 Security sub menu items
Menu items
UEFI setup menu
Hitachi Compute Blade 500 Series EFI User's Guide
1
Selection
Disable Enable or Disable Machine Check
Recovery.
<<Enable>>
<<Disable>> Enable or Disable PCI Live Error
Recovery.
Enable
<<Disable>> Enable or Disable PCIe Isolation.
Enable
<<Disable>> Enable or Disable Hardware Memory
Dump.
Enable
Shows Dump Partition.
<<Spinloop>> Sets Post Process.
Reset
<<Disable>> Enable or Disable DIMM Deconfigured
Mode. Shown with the server blade
Enable
firmware version 06-10 or later.
Disable Enable or Disable POST Fail Retry. POST
Retry is performed automatically when
<<Enable>>
EFI firmware detects any memory failure
at POST.
Selection
- Sets the secure boot configuration.
- Displays TPM option setting window. See
Trusted Platform Module (TPM 1.2) on page
2-100 for details.
Description
Description