Hitachi Compute Blade 500 Series User Manual page 27

Note: Do not change the settings of the following items. If you change the
settings, UEFI may not start up.
• Adapters and UEFI Drivers
• Devices and I/O Ports
• Operating Modes
• Legacy Support
• Storage
• Network
However, when 1 Gb 4-port/8-port LAN mezzanine card is installed in the
mezzanine card slot 4 of storage expansion blade, change the Devices and
I/O Ports configuration. For details, see
page 2-19.
The following table shows description of menu items appeared in the left side
of the window.
Table 2-6 System Settings menu items
Menu items
Adaptors and UEFI
Drivers
Processors
Memory
Devices and I/O Ports
Operating Modes
Legacy Support
System Security
RAS Configuration
Storage
Network
Processors sub menu
Select an item to display or set, and press Enter.
The following table shows description of menu items appeared in the left side
of the window.
Select an item to display or set, and press Enter.
Hitachi Compute Blade 500 Series EFI User's Guide
Storage expansion blade settings on
Displays information about adapters and UEFI drivers on the
server blade.
Displays and provides option to change the processor settings.
See Processors sub menu on page
Displays and provides option to change the memory settings.
See Memory sub menu on page
Displays devices and I/O port options of settings. See
and I/O Ports sub menu on page
Selects the operating mode desired based on your preference.
Selects the legacy support.
Selects the TPM setup options.
See System Security sub menu on page
Sets RAS configuration.
See RAS Configuration sub menu on page
Selects this option to see all the Storage Device options.
Selects the Network setup options
UEFI setup menu
Description
2-7.
2-9.
2-26.
2-10.
2-12.
Device
2-7